Description

MT***0 is a GSM Fixed Wireless Terminals that has FXS, FXO, GSM*1 interface. It can connect with PBX, PSTN or VoIP Gateway. <<Function Description>> 1. Conversion of wire & wireless communication 2. Auto-select economic route 3. Code Conversion Setting :Through the connection towards local PSTN line, the phone calls will proceed with code-transfer dialing process. 4. Vocal volume modulating system 5. Set the Allow-to-Dial Code (GSM Prefix No.Setting (*0 sets)) 6. Set GSM dial-out code amount 7. Polarity reversing function 8. Definition of DTMF reversing signal 9. Limit of communicating time *0. GSM function of dialing out the prompt voice *1. When not connecting to Telephone Office line, GSM will provide the forced dial-out function *2. Set up GSM extra dialing local code *3. Set up extra dialing local-code to PSTN *4. GSM simulated echo-bell-sound function *5. GSM isnï¿&frac*2;t ready, call will be forced to dial out from PSTN *6. Call-transfer:Follow Me (Only dual band) , Tri band and MT***0S don&#**9;t have this function. - PSTN to GSM: An incoming call of PSTN will be transferred to specify GSM no. - GSM to PSTN: ã��1. GSM in PSTN out, give you a prompt "du" and you can enter any destination number ã�� ã��2.An incoming call of GSM will be transferred to specify PSTN no. Frequency Dual band:**0/***0MHZ Quad band <<Full Automatic Economic Router>> ã��MT***0ã��has the function to choose route automatically. When you dial out from your ï¿&frac*2;MT***0ï¿&frac*2;, it will check if this is belong to the Inter-Network number automatically. If yes, then it will dial out from the mobile and send two ï¿&frac*2;beepï¿&frac*2; tones to ensure it really dial out from the mobile. If not, it will still dial out from the Central Office, CO line; it will dial out from your mobile without distinguishing if you donï¿&frac*2;t connect the CO line.